request to quote
Leave Your Message
Anionic Polyacrylamide APAM 0.05% Max Residual Monomer for Electroplating Wastewater Settling CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag
Polyacrylamide for Water & Wastewater Clarification
Products Categories
Featured Products

Anionic Polyacrylamide APAM 0.05% Max Residual Monomer for Electroplating Wastewater Settling CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag

BLUFLOC APAM is a water-soluble anionic polyacrylamide powder selected for use in electroplating wastewater settling. It is designed to support floc formation and physical solid-liquid separation after the upstream chemistry has been optimized. Final grade and dose must be established with representative sample testing.

    Product Introduction

    Electroplating Wastewater Settling buyers are usually not looking for a generic bag of PAM. They need a polymer program that fits segregated or combined plating wastewater after cyanide/chromium treatment and metal-hydroxide precipitation. BLUFLOC APAM is positioned on this page as a grade-selection family for that specific operating problem.

    In the treatment train, BLUFLOC APAM bridges fine precipitated hydroxides into larger flocs for clarification and sludge separation. Because water chemistry, particle charge, shear and separator design all change the result, Bluwat recommends laboratory screening followed by a controlled plant trial rather than publishing a universal dosage or guaranteed removal rate.

    Bluwat PAM factory

    Application Challenges

    Different metals have different optimum precipitation pH.
    Complexing agents can keep metals dissolved.
    Chromium reduction or cyanide oxidation must precede clarification where applicable.
    Fine hydroxide flocs can pass through a clarifier without polymer support.

    How BLUFLOC APAM Works

    After particles have been destabilized when required, hydrated anionic polyacrylamide chains adsorb on more than one particle. This bridging mechanism increases the effective floc size and changes how the solids settle, float or drain. The selected polymer bridges fine precipitated hydroxides into larger flocs for clarification and sludge separation. Polymer selection must balance charge interaction, molecular weight, mixing energy and the target separator.

    Treatment boundary: APAM does not remove dissolved metals or detoxify cyanide/chromium by itself. It supports separation after the necessary chemical reactions.

    Recommended Grade and Selection Guidance

    Screen low, medium and higher anionic-degree grades across the 5-100% family range together with molecular-weight options in the 5-25 million range. The headline parameter is a procurement filter, while the jar test determines the practical grade.

    TDS-Based Technical Specifications

    TDS item Typical family value
    Headline parameter 0.05% maximum residual monomer
    Product family BLUFLOC Anionic Polyacrylamide Powder
    Ionic charge Anionic
    Appearance Off-white granular powder
    Particle size 20-100 mesh
    Molecular weight 5-25 million
    Anionic degree 5-100% family range
    Solid content 89% minimum
    Bulk density About 0.8
    Residual monomer 0.05% maximum
    Recommended working solution 0.1-0.5%
    pH of 1% aqueous solution 6-8
    Storage temperature 0-35 deg C
    Shelf life 2 years
    TDS note: Values describe the BLUFLOC powder family. The supplied TDS labels the degree row as 'Anionic Degree' across all columns; this document uses 'Charge Degree' for CPAM and 'Ionic Degree' for NPAM for clearer publishing. Confirm the final commercial grade by sample testing.

    Application Process

    1. Characterize each waste stream and complete required redox reactions.
    2. Adjust pH to precipitate target metals and verify reaction completion.
    3. Run APAM jar tests on the treated suspension, not untreated plating liquor.
    4. Provide gentle flocculation and controlled settling.
    5. Measure both dissolved and total metals before judging compliance.

    Solution Preparation and Dosing

    1. Fill the make-down tank with clean water and start agitation in the 200-400 rpm TDS range.
    2. Add the powder slowly and evenly to avoid fish-eyes or lumps; do not dump a full bag into one point.
    3. Prepare a 0.1-0.5% working solution and allow about one hour for complete dissolution, subject to water quality and temperature.
    4. Avoid high-speed mixing after hydration because excessive shear can reduce polymer-chain performance.
    5. Meter the dilute solution into the selected feed point. Keep concentrated PAM separate from coagulants unless compatibility is proven.

    Trial Evaluation Checklist

    • Track clarified-water TSS.
    • Track dissolved and total metal concentrations.
    • Track settling rate.
    • Track sludge volume and filterability.
    • Record the untreated control, chemical sequence, mixing energy, water temperature and observations at each dose.

    Product Advantages for Procurement

    • Application-led grade screening for electroplating wastewater settling instead of one-grade-fits-all selling.
    • Powder family covers anionic, cationic and nonionic options for comparative testing.
    • TDS-grounded solid content, particle size, residual monomer, solution concentration, storage and shelf-life data.
    • 25 kg bags and 750 kg net big bags support trials, distributor inventory and bulk plant consumption.
    • Laboratory and technical selection support for sample screening and scale-up planning.

    Packaging, Storage and Handling

    Listing pack: 25 kg kraft paper bag. The family TDS states kraft paper or PE bags with inner plastic bags, 25 kg per bag, or 750 kg net big bags. Store dry at 0-35 deg C, away from direct sunlight and moisture. The stated shelf life is two years. Use normal industrial chemical handling controls and consult the current SDS before use.

    Bluwat Factory Advantages and Technical Support

    Bluwat Chemicals supplies BLUFLOC polyacrylamide directly from manufacturing operations with more than 25 years of industry experience, exports to more than 80 countries, and supports OEM/customization and laboratory grade selection. For publication, the title's ISO 14001 manufacturer wording describes the supplier management-system context; confirm the current certificate and scope before listing it as an active claim.

    Frequently Asked Questions

    Is APAM the correct grade for electroplating wastewater settling?

    It is a TDS-supported screening candidate, not a fixed prescription. Test several molecular-weight and charge options with representative water or sludge, then confirm the best grade in a plant trial.

    What starting dosage should be used?

    No universal plant dosage is stated. Begin with a laboratory dose series, include an untreated control, and optimize the total treatment program against clarity, separation rate, sludge behavior and cost.

    How should the powder be dissolved?

    Prepare a 0.1-0.5% solution by adding the powder slowly into agitated water. The TDS indicates about one hour for complete dissolution and 200-400 rpm agitation. Avoid high shear and undissolved lumps.

    Can BLUFLOC PAM replace the primary coagulant or reaction chemistry?

    Not automatically. APAM does not remove dissolved metals or detoxify cyanide/chromium by itself. It supports separation after the necessary chemical reactions. In many applications PAM is added after coagulation, precipitation, neutralization or emulsion breaking.

    What information should be sent for grade selection?

    Send the application, treatment flow diagram, pH, conductivity, TSS or sludge solids, current chemicals and doses, separation equipment, target water quality, and a representative sample when possible. Key trial metrics should include clarified-water TSS, dissolved and total metal concentrations, settling rate.

    What packaging and storage conditions apply?

    This listing uses 25 kg kraft paper bag. The TDS also allows 25 kg kraft/PE bags with inner plastic bags or 750 kg net big bags. Store dry at 0-35 deg C, protect from sunlight and moisture, and use within the two-year shelf life.

    Request a Sample and Treatment Recommendation

    CTA: Send Bluwat your electroplating wastewater settling sample, current treatment sequence, water or sludge analysis, separator type and performance target. The technical team can recommend a short list of BLUFLOC grades for jar testing, provide a sample and support the transition from laboratory screening to a controlled plant trial.

    Leave Your Message