- Plant-Based Deodorant
- Water Treatment Chemicals
- Coagulant
-
Flocculant
- Polyacrylamide for Textile, Food & Process Industries
- Polyacrylamide for Oil, Gas & Drilling
- Polyacrylamide for Pulp&Paper
- Polyacrylamide for Mining & Mineral Processing
- Polyacrylamide for Sludge Dewatering
- Polyacrylamide for Water & Wastewater Clarification
- Polyacrylamide Emulsion
- Polyacrylamide Powder
- BWD-01 Water Decoloring Agent
Anionic Polyacrylamide APAM 0.1-0.5% Working Solution for Process Water Recycling and Solids Removal CAS 9003-05-8 ISO 9001 Manufacturer 750kg Net Big Bag
Product Introduction
Low-Charge Industrial Wastewater Clarification buyers are usually not looking for a generic bag of PAM. They need a polymer program that fits fine suspended solids with low or variable apparent surface charge. BLUFLOC NPAM is positioned on this page as a grade-selection family for that specific operating problem.
In the treatment train, BLUFLOC NPAM relies mainly on adsorption and polymer bridging while adding little ionic charge to the system. Because water chemistry, particle charge, shear and separator design all change the result, Bluwat recommends laboratory screening followed by a controlled plant trial rather than publishing a universal dosage or guaranteed removal rate.

Application Challenges
How BLUFLOC NPAM Works
After particles have been destabilized when required, hydrated nonionic polyacrylamide chains adsorb on more than one particle. This bridging mechanism increases the effective floc size and changes how the solids settle, float or drain. The selected polymer relies mainly on adsorption and polymer bridging while adding little ionic charge to the system. Polymer selection must balance charge interaction, molecular weight, mixing energy and the target separator.
Recommended Grade and Selection Guidance
Use NPAM as the low-ionic-charge comparison, then benchmark it against selected APAM and CPAM grades when the wastewater charge is uncertain. The headline parameter is a procurement filter, while the jar test determines the practical grade.
TDS-Based Technical Specifications
| TDS item | Typical family value |
|---|---|
| Headline parameter | 5-12 million molecular weight; 89% minimum solid content |
| Product family | BLUFLOC Nonionic Polyacrylamide Powder |
| Ionic charge | Nonionic |
| Appearance | Off-white granular powder |
| Particle size | 20-100 mesh |
| Molecular weight | 5-12 million |
| Ionic degree | 0-5% family range* |
| Solid content | 89% minimum |
| Bulk density | About 0.8 |
| Residual monomer | 0.05% maximum |
| Recommended working solution | 0.1-0.5% |
| pH of 1% aqueous solution | 6-7 |
| Storage temperature | 0-35 deg C |
| Shelf life | 2 years |
Application Process
- Measure pH, conductivity and, where available, zeta potential.
- Compare NPAM directly with low- and medium-charge APAM/CPAM candidates.
- Hydrate completely and apply at low concentration.
- Use gentle mixing and observe both floc formation and breakage.
- Confirm performance over several production batches.
Solution Preparation and Dosing
- Fill the make-down tank with clean water and start agitation in the 200-400 rpm TDS range.
- Add the powder slowly and evenly to avoid fish-eyes or lumps; do not dump a full bag into one point.
- Prepare a 0.1-0.5% working solution and allow about one hour for complete dissolution, subject to water quality and temperature.
- Avoid high-speed mixing after hydration because excessive shear can reduce polymer-chain performance.
- Meter the dilute solution into the selected feed point. Keep concentrated PAM separate from coagulants unless compatibility is proven.
Trial Evaluation Checklist
- Track dose-response width.
- Track clarity.
- Track settling or flotation response.
- Track sensitivity to conductivity and pH.
- Record the untreated control, chemical sequence, mixing energy, water temperature and observations at each dose.
Product Advantages for Procurement
- Application-led grade screening for low-charge industrial wastewater clarification instead of one-grade-fits-all selling.
- Powder family covers anionic, cationic and nonionic options for comparative testing.
- TDS-grounded solid content, particle size, residual monomer, solution concentration, storage and shelf-life data.
- 25 kg bags and 750 kg net big bags support trials, distributor inventory and bulk plant consumption.
- Laboratory and technical selection support for sample screening and scale-up planning.
Packaging, Storage and Handling
Listing pack: 25 kg PE bag with inner liner. The family TDS states kraft paper or PE bags with inner plastic bags, 25 kg per bag, or 750 kg net big bags. Store dry at 0-35 deg C, away from direct sunlight and moisture. The stated shelf life is two years. Use normal industrial chemical handling controls and consult the current SDS before use.
Bluwat Factory Advantages and Technical Support
Bluwat Chemicals supplies BLUFLOC polyacrylamide directly from manufacturing operations with more than 25 years of industry experience, exports to more than 80 countries, and supports OEM/customization and laboratory grade selection. For publication, the title's ISO 14001 manufacturer wording describes the supplier management-system context; confirm the current certificate and scope before listing it as an active claim.
Frequently Asked Questions
Is NPAM the correct grade for low-charge industrial wastewater clarification?
It is a TDS-supported screening candidate, not a fixed prescription. Test several molecular-weight and charge options with representative water or sludge, then confirm the best grade in a plant trial.
What starting dosage should be used?
No universal plant dosage is stated. Begin with a laboratory dose series, include an untreated control, and optimize the total treatment program against clarity, separation rate, sludge behavior and cost.
How should the powder be dissolved?
Prepare a 0.1-0.5% solution by adding the powder slowly into agitated water. The TDS indicates about one hour for complete dissolution and 200-400 rpm agitation. Avoid high shear and undissolved lumps.
Can BLUFLOC PAM replace the primary coagulant or reaction chemistry?
Not automatically. NPAM is a screening option, not automatically the correct polymer for every low-charge stream. Comparative jar testing is essential. In many applications PAM is added after coagulation, precipitation, neutralization or emulsion breaking.
What information should be sent for grade selection?
Send the application, treatment flow diagram, pH, conductivity, TSS or sludge solids, current chemicals and doses, separation equipment, target water quality, and a representative sample when possible. Key trial metrics should include dose-response width, clarity, settling or flotation response.
What packaging and storage conditions apply?
This listing uses 25 kg PE bag with inner liner. The TDS also allows 25 kg kraft/PE bags with inner plastic bags or 750 kg net big bags. Store dry at 0-35 deg C, protect from sunlight and moisture, and use within the two-year shelf life.
Request a Sample and Treatment Recommendation
CTA: Send Bluwat your low-charge industrial wastewater clarification sample, current treatment sequence, water or sludge analysis, separator type and performance target. The technical team can recommend a short list of BLUFLOC grades for jar testing, provide a sample and support the transition from laboratory screening to a controlled plant trial.










