request to quote
Leave Your Message
Anionic Polyacrylamide APAM 2-Year Shelf Life 89% Min Solid for Fine Paper Retention Program CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag
Polyacrylamide for Pulp&Paper
Products Categories
Featured Products

Anionic Polyacrylamide APAM 2-Year Shelf Life 89% Min Solid for Fine Paper Retention Program CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag

BLUFLOC APAM powder is a candidate component of fine-paper retention programs that provide compatible adsorption sites. It has at least 89% solids and a stated two-year shelf life. Assess ash retention and formation with the complete additive sequence before adopting an anionic grade.

    📋Product Overview

    BLUFLOC APAM can be screened as part of a fine-paper retention program when cationic conditioning or other suitable adsorption sites are present. Its purpose is to help retain useful fines and filler without compromising the uniformity required for the finished paper.

    Anionic polyacrylamide should be selected within the complete program. Its negative charge means that direct addition to an unconditioned, negatively charged furnish may not produce the intended retention response.

    ⚠️Cause

    Fine-paper furnishes often combine fibers, mineral filler and several functional additives. Their interactions can leave small particles poorly retained or create unstable filler circulation in white water.

    A poorly matched retention aid can also create coarse filler flocs. Even if ash retention rises, uneven distribution may affect appearance, print quality or strength, making formation a central selection criterion.

    💡Solution

    Test APAM with the mill's actual cationic starch, conditioner and other additives in the intended order. Include a baseline with the existing program and a comparison that omits APAM to identify its contribution.

    Measure total and ash retention, drainage and formation at the desired sheet ash level. Advance only programs that give a useful balance, rather than selecting the sample with the largest flocs or the greatest single retention result.

    polyacrylamide for papermaking application.jpg

    📊Specifications

    Parameter Series specification
    Product series BLUFLOC polyacrylamide powder
    Ionic type Anionic polyacrylamide
    Appearance Off-white granular powder
    Particle size 20–100 mesh
    Molecular weight 5–25 million; grade-dependent
    Anionic degree 5–100%; grade-dependent
    Solids content 89% minimum
    Residual monomer 0.05% maximum
    Recommended working solution 0.1–0.5%
    pH of 1% aqueous solution 6–8
    Storage temperature 0–35 °C
    Shelf life 2 years under suitable storage conditions
    Selected packaging 25 kg kraft paper bag with inner plastic liner
    PAM CAS reference 9003-05-8

    ⚙️Application

    This application focuses on filled fine paper and printing or writing grades where retention must remain compatible with sheet uniformity. It concerns the paper-machine wet end rather than downstream white-water treatment.

    The same APAM powder may behave differently when filler type or the cationic conditioning step changes. A grade selected for one furnish should be rechecked before transfer to another.

    🔍How It Works

    APAM chains can bridge particles after adsorption onto compatible cationic sites. Conditioning chemistry therefore influences where the polymer attaches and how the furnish aggregates.

    The retained aggregates must distribute evenly through the developing sheet. The mechanism supports retention only within a suitable charge environment and controlled mixing sequence.

    🎯How To Choose

    Specify filler type, target ash, furnish blend, current starch and conditioner doses, pH and conductivity. Screen anionic degree and molecular weight with a fixed conditioning sequence.

    Use formation and relevant finished-paper properties as acceptance checks alongside retention. Confirm complete powder dissolution and reproducible solution concentration. Store the lined 25 kg bags dry, away from sunlight and within the stated storage range; apply the two-year shelf-life claim only under suitable storage conditions.

    ⚗️Solution Preparation and Storage

    Prepare a 0.1–0.5% solution by gradually feeding the powder into clean water with controlled agitation. On an as-supplied product basis, this is 1–5 g of powder per kg of final solution. Keep the concentration definition consistent throughout grade comparisons.

    The TDS gives about one hour for dissolution and 200–400 rpm as preparation guidance. Actual dissolution time depends on polymer type, water quality, temperature and mixing. Adjust agitation for the tank and impeller; avoid excessive shear that can damage polymer chains.

    Check for undissolved granules and gel lumps before dosing. Keep powder dry, protect it from sunlight and store within 0–35 °C. Follow the grade SDS for handling; clean polymer spills promptly because wet polymer can create slippery surfaces.

    Disperse the matured solution uniformly at the tested wet-end addition point. Further dilution for delivery may be useful if the make-down and dosing equipment require it; verify the final program on the machine.

    ❓FAQ

    Can APAM act as a stand-alone fine-paper retention aid?

    Only if the furnish provides suitable adsorption conditions. Many programs need cationic conditioning or another compatible component, so a stand-alone assumption should be tested.

    What makes this different from white-water clarification?

    Fine-paper retention aims to retain material in the sheet while protecting formation. Clarification aims to separate solids from a water stream and can tolerate different floc structures.

    Should higher ash retention always be accepted?

    No. Check formation, appearance and relevant paper properties at the target ash content. Greater retention can be commercially unhelpful if the finished paper falls outside specification.

    📄Supplier Documentation and Grade Enquiry

    Bluwat Chemicals supplies BLUFLOC powder polymers in anionic, cationic and nonionic grades. For supplier qualification, request the selected grade TDS, SDS, batch COA and current ISO 9001 documentation. Send the process information listed above when requesting a sample or grade recommendation.

    Leave Your Message