request to quote
Leave Your Message
Anionic Polyacrylamide APAM pH 6-8 in 1% Solution for Industrial Wastewater Primary Clarification CAS 9003-05-8 ISO 9001 Manufacturer 25kg PE Bag
Polyacrylamide for Water & Wastewater Clarification
Products Categories
Featured Products

Anionic Polyacrylamide APAM pH 6-8 in 1% Solution for Industrial Wastewater Primary Clarification CAS 9003-05-8 ISO 9001 Manufacturer 25kg PE Bag

 BLUFLOC APAM is a water-soluble anionic polyacrylamide powder selected for use in industrial wastewater primary clarification. It is designed to support floc formation and physical solid-liquid separation after the upstream chemistry has been optimized. Final grade and dose must be established with representative sample testing.

    01

    Product IntroductionBLUFLOC APAM Grade-Selection Family

    Industrial Wastewater Primary Clarification buyers are usually not looking for a generic bag of PAM. They need a polymer program that fits equalized industrial wastewater containing settleable solids, fines and coagulant-generated microflocs. BLUFLOC APAM is positioned on this page as a grade-selection family for that specific operating problem.

    In the treatment train, BLUFLOC APAM promotes interparticle bridging so the primary clarifier receives larger, more settleable aggregates. Because water chemistry, particle charge, shear and separator design all change the result, Bluwat recommends laboratory screening followed by a controlled plant trial rather than publishing a universal dosage or guaranteed removal rate.

    Bluwat Chemicals polyacrylamide powder production and quality-control facility for BLUFLOC APAM
    Bluwat polyacrylamide manufacturing operations
    02

    Application ChallengesWhat Operators Are Solving For

    Wastewater composition can change between production campaigns.
    Oil, surfactant or extreme pH may interfere with flocculation.
    Poor coagulant control leaves particles insufficiently destabilized.
    A narrow optimum dose may be hidden by grab-sample variability.
    03

    How BLUFLOC APAM WorksBridging Mechanism

    After particles have been destabilized when required, hydrated anionic polyacrylamide chains adsorb on more than one particle. This bridging mechanism increases the effective floc size and changes how the solids settle, float or drain. The selected polymer promotes interparticle bridging so the primary clarifier receives larger, more settleable aggregates. Polymer selection must balance charge interaction, molecular weight, mixing energy and the target separator.

    Boundary

    Treatment boundary: APAM is not a substitute for pH correction, metal precipitation, oxidation or biological treatment when those processes are required.

    04

    Recommended Grade and Selection GuidanceScreen Before You Specify

    Screen low, medium and higher anionic-degree grades across the 5-100% family range together with molecular-weight options in the 5-25 million range. The headline parameter is a procurement filter, while the jar test determines the practical grade.

    05

    TDS-Based Technical SpecificationsBLUFLOC Anionic Powder Family

    TDS item Typical family value
    Headline parameter pH 6-8 in a 1% aqueous solution
    Product family BLUFLOC Anionic Polyacrylamide Powder
    Ionic charge Anionic
    Appearance Off-white granular powder
    Particle size 20-100 mesh
    Molecular weight 5-25 million
    Anionic degree 5-100% family range
    Solid content 89% minimum
    Bulk density About 0.8
    Residual monomer 0.05% maximum
    Recommended working solution 0.1-0.5%
    pH of 1% aqueous solution 6-8
    Storage temperature 0-35 deg C
    Shelf life 2 years

    TDS note: Values describe the BLUFLOC powder family. The supplied TDS labels the degree row as 'Anionic Degree' across all columns; this document uses 'Charge Degree' for CPAM and 'Ionic Degree' for NPAM for clearer publishing. Confirm the final commercial grade by sample testing.

    06

    Application ProcessFrom Equalization to Plant Trial

    1. Equalize the stream and record pH, conductivity, TSS and oil/grease where relevant.
    2. Complete neutralization, precipitation or emulsion breaking before polymer screening.
    3. Optimize the coagulant, then add dilute APAM under controlled gentle mixing.
    4. Compare settleability, supernatant clarity and sludge volume.
    5. Run a monitored plant trial across representative production conditions.
    07

    Solution Preparation and DosingMake-Down Best Practice

    1. Fill the make-down tank with clean water and start agitation in the 200-400 rpm TDS range.
    2. Add the powder slowly and evenly to avoid fish-eyes or lumps; do not dump a full bag into one point.
    3. Prepare a 0.1-0.5% working solution and allow about one hour for complete dissolution, subject to water quality and temperature.
    4. Avoid high-speed mixing after hydration because excessive shear can reduce polymer-chain performance.
    5. Meter the dilute solution into the selected feed point. Keep concentrated PAM separate from coagulants unless compatibility is proven.
    08

    Trial Evaluation ChecklistWhat to Measure During Screening

    • Track primary clarifier TSS removal.
    • Track sludge volume index or settling interface.
    • Track coagulant-plus-polymer cost.
    • Track downstream biological loading.
    • Record the untreated control, chemical sequence, mixing energy, water temperature and observations at each dose.
    09

    Product Advantages for ProcurementWhy Buyers Shortlist BLUFLOC

    • Application-led grade screening for industrial wastewater primary clarification instead of one-grade-fits-all selling.
    • Powder family covers anionic, cationic and nonionic options for comparative testing.
    • TDS-grounded solid content, particle size, residual monomer, solution concentration, storage and shelf-life data.
    • 25 kg bags and 750 kg net big bags support trials, distributor inventory and bulk plant consumption.
    • Laboratory and technical selection support for sample screening and scale-up planning.
    10

    Packaging, Storage and HandlingListing Pack and Bulk Options

    Listing pack: 25 kg PE bag with inner liner. The family TDS states kraft paper or PE bags with inner plastic bags, 25 kg per bag, or 750 kg net big bags. Store dry at 0-35 deg C, away from direct sunlight and moisture. The stated shelf life is two years. Use normal industrial chemical handling controls and consult the current SDS before use.

    11

    Bluwat Factory Advantages and Technical SupportManufacturer-Direct Supply

    BLUFLOC polyacrylamide supplied directly from manufacturing operations

    Bluwat Chemicals supplies BLUFLOC polyacrylamide directly from manufacturing operations with more than 25 years of industry experience, exports to more than 80 countries, and supports OEM/customization and laboratory grade selection. For publication, the title's ISO 9001 manufacturer wording describes the supplier management-system context; confirm the current certificate and scope before listing it as an active claim.

    25+Years of experience
    80+Export countries
    OEMCustomization support
    LABGrade selection support
    12

    Frequently Asked QuestionsTechnical and Procurement

    Is APAM the correct grade for industrial wastewater primary clarification?

    It is a TDS-supported screening candidate, not a fixed prescription. Test several molecular-weight and charge options with representative water or sludge, then confirm the best grade in a plant trial.

    What starting dosage should be used?

    No universal plant dosage is stated. Begin with a laboratory dose series, include an untreated control, and optimize the total treatment program against clarity, separation rate, sludge behavior and cost.

    How should the powder be dissolved?

    Prepare a 0.1-0.5% solution by adding the powder slowly into agitated water. The TDS indicates about one hour for complete dissolution and 200-400 rpm agitation. Avoid high shear and undissolved lumps.

    Can BLUFLOC PAM replace the primary coagulant or reaction chemistry?

    Not automatically. APAM is not a substitute for pH correction, metal precipitation, oxidation or biological treatment when those processes are required. In many applications PAM is added after coagulation, precipitation, neutralization or emulsion breaking.

    What information should be sent for grade selection?

    Send the application, treatment flow diagram, pH, conductivity, TSS or sludge solids, current chemicals and doses, separation equipment, target water quality, and a representative sample when possible. Key trial metrics should include primary clarifier TSS removal, sludge volume index or settling interface, coagulant-plus-polymer cost.

    What packaging and storage conditions apply?

    This listing uses 25 kg PE bag with inner liner. The TDS also allows 25 kg kraft/PE bags with inner plastic bags or 750 kg net big bags. Store dry at 0-35 deg C, protect from sunlight and moisture, and use within the two-year shelf life.

    Request a Sample and Treatment Recommendation

    Send Bluwat your industrial wastewater primary clarification sample, current treatment sequence, water or sludge analysis, separator type and performance target.

    • Receive a short list of BLUFLOC grades for jar testing.
    • Get a sample for laboratory screening.
    • Technical support for the transition from laboratory screening to a controlled plant trial.

    Leave Your Message