- Plant-Based Deodorant
- Water Treatment Chemicals
- Coagulant
-
Flocculant
- Polyacrylamide for Textile, Food & Process Industries
- Polyacrylamide for Oil, Gas & Drilling
- Polyacrylamide for Pulp&Paper
- Polyacrylamide for Mining & Mineral Processing
- Polyacrylamide for Sludge Dewatering
- Polyacrylamide for Water & Wastewater Clarification
- Polyacrylamide Emulsion
- Polyacrylamide Powder
- BWD-01 Water Decoloring Agent
Anionic Polyacrylamide for Bauxite red mud settling
For bauxite red mud settling, APAM is a screening option: select the actual grade from settling and clarity trials on the plant stream. The Blufloc series TDS lists 20–100 mesh and minimum 89% solids as a typical or preparation property, but it does not identify a mining-specific SKU or guarantee an operating result.
Red mud streams from alumina operations can be strongly alkaline and chemically demanding. A generic powder TDS does not establish compatibility or performance under Bayer liquor conditions.
Only screen candidate anionic grades after checking site specific liquor, temperature and caustic concentration with the technical team.

These figures come from the supplied series TDS. They describe typical product families and are subject to grade and batch confirmation.
Appearance: Off white granular powder
Ionic type: Anionic
Particle size: 20–100 mesh
Molecular weight: 5–25 million, typical series range
Anionic degree: 5–100%, typical series range
Solid content: 89% minimum
Residual monomer: 0.05% maximum
pH of 1% aqueous solution: 6–8
Working solution: 0.1–0.5% powder concentration in water
Storage and shelf life: 0–35 °C; two years as stated in the series TDS
Packaging: 25 kg PE or kraft paper bag with inner plastic liner; 750 kg net big bag, subject to order confirmation
Use plant liquor and representative red mud at operating temperature; compare settling, overflow clarity, mud compaction and downstream filtration behavior.
A grade is suitable only when tested under the refinery’s actual caustic and temperature conditions.
Prepare the powder as a 0.1–0.5% solution by slowly dispersing it into mixing water. The series TDS advises approximately one hour of agitation, typically 200–400 rpm; avoid lumps and unnecessarily high shear. Trial dose must be established on site: 0.1–0.5% describes the prepared solution concentration, not a dose in ppm or kilograms per tonne. Introduce the solution where it can contact the slurry before the settling or separation equipment; confirm the exact injection point through testing.
Share the liquor causticity, temperature, red mud solids and equipment arrangement. Include representative sample availability, treatment flow and current chemical program so the technical team can suggest grades for comparison.
Available packaging in the series TDS includes 750 kg net big bag; confirm the packaging for the quoted grade and destination.
It is a candidate, not an automatic choice. Only screen candidate anionic grades after checking site specific liquor, temperature and caustic concentration with the technical team. A comparison with other ionic grades may be warranted if the site sample responds poorly.
Use plant liquor and representative red mud at operating temperature; compare settling, overflow clarity, mud compaction and downstream filtration behavior. A grade is suitable only when tested under the refinery’s actual caustic and temperature conditions.
No. It is the TDS range for preparing the working solution. Determine the addition rate from slurry solids, water chemistry and the plant’s equipment; request a grade-specific recommendation from sales.
Ask Bluwat sales to confirm the recommended APAM grade, the current grade-specific TDS, COA and SDS, and the actual specifications for the offered lot.










