BLUFLOC Polyacrylamide Oil Drilling Grade with 89% Solid Content for Stable Mud System Performance
Product Overview
BLUFLOC Polyacrylamide Oil Drilling Grade is a high performance water soluble polymer powder designed for oil and gas drilling fluid applications. With minimum 89% solid content, controlled powder quality and high molecular weight options, it helps drilling mud systems maintain more stable viscosity, rheology, suspension and circulation performance.
In oilfield drilling, a stable mud system is essential for safe and efficient operation. Drilling fluid must carry cuttings, cool and lubricate drilling tools, protect the borehole wall, support shale stability and help control fluid loss. When the mud system is unstable, common problems may include viscosity fluctuation, poor cuttings transport, shale swelling, high fluid loss, borehole instability and inefficient mud circulation.
BLUFLOC oil drilling grade PAM helps improve water based drilling mud performance by forming a polymer solution after proper dissolution. It supports viscosity control, improves mud consistency, enhances cuttings suspension and contributes to more stable drilling fluid behavior under field conditions.
This product is suitable for oilfield drilling contractors, mud service companies, drilling chemical distributors and oilfield wastewater treatment operators looking for stable quality polyacrylamide powder for drilling mud systems.
Key Product Features
Oil drilling grade polyacrylamide powder for water based mud systems
Minimum 89% solid content for stable active polymer content
Supports stable drilling mud viscosity and rheology
Helps improve mud system performance during circulation
Supports cuttings suspension and carrying capacity
Helps improve borehole stability and shale stabilization
Supports lubrication in water based drilling fluid
Can support fluid loss control in suitable mud formulations
20 to 100 mesh granular powder for practical handling
Recommended working concentration from 0.1 to 0.5%
Low dosage requirement and economical use
Factory direct supply with technical support and customized grades
Technical Specifications
| Item | Specification |
|---|---|
| Product Name | BLUFLOC Polyacrylamide Oil Drilling Grade |
| Product Type | Water Soluble Polymer Powder |
| Recommended Type | Anionic Polyacrylamide |
| Available Types | Anionic, Cationic, Nonionic and Emulsion PAM |
| Appearance | Off White Granular Powder |
| Particle Size | 20 to 100 Mesh |
| Molecular Weight of Anionic Type | 5 to 25 Million |
| Anionic Degree Range | 5 to 100% |
| Solid Content | Minimum 89% |
| Bulk Density | About 0.8 |
| Residual Monomer | Max 0.05% |
| Recommended Working Concentration | 0.1 to 0.5% |
| pH of 1% Solution | Around 6 to 8 for Anionic Type |
| Storage Temperature | 0 to 35 Degree C |
| Shelf Life | 2 Years |
| Standard Package | 25 kg Bag |
| Big Package | 750 kg Big Bag |
| Available Documents | TDS, MSDS and COA |
Main Applications in Oil Drilling
Stable Mud System Performance
BLUFLOC Polyacrylamide Oil Drilling Grade helps improve the stability of water based drilling mud. It supports consistent viscosity, better suspension and more stable mud behavior during drilling circulation.
Drilling Fluid Viscosity Control
Proper viscosity is important for cuttings transport and mud circulation. BLUFLOC PAM helps build and maintain drilling fluid viscosity, supporting better hole cleaning and mud system control.
Shale Stabilization
In shale and clay rich formations, water invasion may cause shale swelling and dispersion. BLUFLOC PAM supports shale stabilization by improving drilling mud structure, viscosity and filtration behavior.
Borehole Stability
A stable drilling fluid system helps protect the borehole wall and reduce instability problems. BLUFLOC oil drilling grade PAM supports better borehole conditions by improving mud consistency and reducing performance fluctuation.
Cuttings Suspension
Drill cuttings must remain suspended and be transported to the surface. High molecular weight PAM helps improve mud carrying capacity and reduces the risk of cuttings settling during circulation.
Lubrication Support
After proper dissolution, BLUFLOC PAM forms a polymer solution that can support lubrication in water based drilling fluid. Better lubrication helps reduce friction during mud circulation and drilling operation.
Fluid Loss Control Support
BLUFLOC PAM can support fluid loss control by improving the polymer structure of the mud system. This helps reduce excessive filtrate loss when used in a suitable drilling fluid formulation.
Oilfield Mud Water Treatment
Besides drilling fluid application, BLUFLOC PAM can also be used in selected oilfield wastewater clarification and mud water treatment systems where suspended solids settling and solid liquid separation are required.
Why 89% Solid Content Matters
The minimum 89% solid content means the powder contains a high level of active polymer. For oilfield users, this is important because stable active content supports more consistent solution preparation, more predictable dosing and more reliable mud system performance.
In field operations, unstable product quality can lead to viscosity fluctuation, inconsistent mud performance and higher chemical consumption. A stable 89% solid content PAM helps oilfield customers control dosing more easily and maintain better drilling fluid performance.
For distributors and mud service companies, high solid content also supports better storage efficiency, lower transportation burden and more consistent product value.
How BLUFLOC PAM Supports Stable Mud Performance
After the powder is fully dissolved in water, BLUFLOC PAM forms a high molecular weight polymer solution. When added into the drilling mud system, the polymer chains help improve the mud structure and support stable rheology.
This helps the mud system perform better in several ways:
Improves viscosity response
Supports cuttings carrying capacity
Reduces mud performance fluctuation
Supports shale control
Improves lubrication behavior
Supports fluid loss control
Helps maintain better drilling fluid consistency
The product should be fully dissolved before being added into the mud system. Incomplete dissolution may reduce viscosity performance and cause uneven mud behavior.
Typical Problems This Product Can Help Improve
Unstable drilling mud viscosity
Poor water based mud performance
Weak cuttings suspension
Cuttings settling during circulation
Shale swelling and dispersion
Borehole instability
High friction during drilling operation
Excessive fluid loss tendency
Poor mud rheology control
Need for stable quality oil drilling grade PAM
Need for high solid content drilling fluid polymer
Recommended Solution Preparation
Prepare BLUFLOC PAM solution at 0.1 to 0.5% concentration.
Add the powder slowly and evenly into clean water.
Keep continuous agitation during powder addition.
Recommended agitation speed is 200 to 400 rpm.
Normal dissolving time is about 1 hour.
Avoid adding powder too quickly because lumping may occur.
Avoid excessive high speed agitation because it may damage polymer molecular chains.
Use the fully dissolved polymer solution before adding it into the drilling mud system.
Do not add dry powder directly into high solids drilling mud without proper pre dissolution.
Suggested Application Process
Prepare clean water in a mixing tank.
Start agitation at the recommended speed.
Slowly add BLUFLOC oil drilling grade PAM powder.
Continue agitation until the polymer is fully dissolved.
Dose the prepared polymer solution into the water based drilling mud system.
Mix evenly to distribute the polymer through the mud.
Check viscosity, suspension, lubrication and mud stability.
Adjust dosage according to field testing results.
For complex mud systems, compatibility testing with other drilling fluid additives is recommended.
General Dosing Guidance
The actual dosage depends on mud formulation, water quality, salinity, temperature, mud density, shale activity, target viscosity, cuttings load and fluid loss control requirement.
For stable mud system performance, the product should be tested with the existing drilling mud formulation before field application.
Bluwat can provide product selection advice and dosing recommendations according to customer drilling fluid requirements, field conditions and target performance.
Recommended Grades
Depending on application requirements, Bluwat can recommend different oil drilling grade PAM options:
HA7525 for high molecular weight viscosity control and strong mud performance support
HA6518 for drilling mud additive and cuttings suspension
AA6518 for oil drilling wastewater clarification and drilling mud solids control
Customized anionic PAM grades for special salinity, viscosity or field requirements
Final product selection should be based on mud formulation, water salinity, temperature, shale activity and testing results.
Product Advantages for Oilfield Buyers
Minimum 89% solid content
Stable active polymer content for consistent field dosing
Suitable for water based drilling mud systems
Supports stable mud system performance
Helps improve viscosity, rheology and suspension
Supports shale stabilization and borehole stability
Can improve lubrication and fluid loss control support
20 to 100 mesh powder form
Recommended 0.1 to 0.5% working concentration
Low dosage and economical use
Factory direct supply from China
TDS, MSDS and COA available
Customized molecular weight and anionic degree available
Packaging and Storage
BLUFLOC Polyacrylamide Oil Drilling Grade is packed in 25 kg kraft paper bags with inner PE liner or 750 kg jumbo bags.
Store the product in a cool, dry and ventilated warehouse.
Avoid direct sunlight and moisture.
Keep the package sealed after opening.
Recommended storage temperature is 0 to 35 Degree C.
Shelf life is 2 years under proper storage conditions.
The product is water soluble, non flammable and non explosive under normal storage conditions.
Bluwat Factory Supply Capability
Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.
Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, oilfield wastewater treatment, mining, papermaking, municipal sewage treatment, industrial wastewater clarification and sludge dewatering.
For oilfield customers, Bluwat can provide technical support, sample support, TDS, MSDS, COA, product selection recommendations and customized PAM grades according to drilling mud formulation, salinity, temperature and field performance requirements.
Available Documents
TDS available
MSDS available
COA available
Sample support available
OEM packaging available
Customized product recommendation available
FAQ
What is BLUFLOC Polyacrylamide Oil Drilling Grade used for?
It is used for stable mud system performance, drilling fluid viscosity control, shale stabilization, borehole stability, lubrication support, cuttings suspension and fluid loss control support.
What is the solid content of this product?
The solid content is minimum 89%.
Why is 89% solid content important?
Minimum 89% solid content helps provide stable active polymer content, consistent solution preparation and more predictable field dosing.
Is this product suitable for water based drilling mud?
Yes. BLUFLOC oil drilling grade PAM is suitable for water based drilling mud systems where stable viscosity, rheology and mud performance are required.
Can this product improve mud system stability?
Yes. It helps improve viscosity, suspension, lubrication and mud structure, supporting more stable drilling fluid performance.
Can it help with shale stabilization?
Yes. BLUFLOC PAM can support shale stabilization by improving drilling mud performance and reducing shale dispersion tendency in water based mud systems.
Can it reduce fluid loss?
It can support fluid loss control when used in suitable drilling fluid formulations. Field testing is recommended to confirm the final performance.
What is the recommended working concentration?
The recommended working concentration is 0.1 to 0.5%.
How long does it take to dissolve?
Normally it takes about 1 hour under proper agitation conditions.
Can Bluwat recommend a suitable oil drilling PAM grade?
Yes. Bluwat can recommend HA7525, HA6518, AA6518 or customized PAM grades according to drilling mud requirements and field conditions.