request to quote
Leave Your Message
Cationic Polyacrylamide CPAM 2-Year Shelf Life 89% Min Solid for Fermentation Wastewater Sludge Conditioning CAS 9003-05-8 ISO 9001 Manufacturer 750kg Net Big Bag
Polyacrylamide for Textile, Food & Process Industries
Products Categories
Featured Products

Cationic Polyacrylamide CPAM 2-Year Shelf Life 89% Min Solid for Fermentation Wastewater Sludge Conditioning CAS 9003-05-8 ISO 9001 Manufacturer 750kg Net Big Bag

Blufloc CPAM is a dry polymer for conditioning compatible fermentation wastewater sludge. It has a minimum solid content of 89% and a stated two-year shelf life when stored as directed. Grade selection depends on the fermentation process, wastewater treatment stage and sludge dewatering behavior.

    Product overview

    Fermentation plants may produce biomass-rich residues and wastewater treatment sludge with different proportions of cells, fine particles and biological material. Some sludge contains extracellular material that retains water and complicates dewatering. The source and condition of the solids matter more than the general fermentation industry label.

    CPAM can be screened for charge interactions and bridging that promote useful floc formation before thickening or mechanical dewatering. The aim is water release with adequate solids capture. Industrial wastewater sludge conditioning should be kept distinct from recovery of production biomass for food, feed or another regulated product.

    Product benefits

    • Support conditioning trials on biomass-rich wastewater treatment sludge.
    • Compare charge and molecular weight against the actual fermentation process.
    • Evaluate drainage and capture under representative machine conditions.
    • Provide bulk powder with defined dry-product quality and storage parameters.

    Bluwat PAM factory.jpg

    Technical data

    Parameter

    Specification

    Product family

    Blufloc CPAM powder

    Ionic character

    Cationic

    Appearance

    Off-white granular powder

    Particle size

    20-100 mesh

    Molecular weight

    5-12 million depending on grade

    Charge or ionic degree

    5-80% cationic charge degree depending on grade

    Solid content

    89% minimum

    Residual monomer

    0.05% maximum

    pH of 1% aqueous solution

    4-6

    Recommended solution concentration

    0.1-0.5%

    CAS reference

    9003-05-8

    Featured packaging

    750 kg net big bag

    Molecular weight and charge ranges describe the product family. Confirm the selected grade and current batch specification with Bluwat. The pH of a 1% product solution is a test parameter, not the required plant operating pH.

    Application process

    Identify whether the sample is production biomass, biological treatment sludge or a documented blend. For the wastewater sludge duty, measure feed solids and prepare CPAM separately. Screen grades and dosage using comparable samples, then verify performance through the full conditioning and dewatering route. Repeat with a representative variation in batch or fermentation campaign.

    Grade and dosage selection

    Assess sludge age, pH, salinity, upstream chemicals and the variability of the fermentation process. If high dose gives a sticky floc without useful drainage, review overdosing, solution preparation and the sludge structure instead of selecting solely for floc size. Confirm bulk handling capacity before choosing 750 kg packaging, and keep the powder protected from moisture.

    Performance evaluation

    Track cake dry solids, filtrate suspended solids, throughput and polymer demand per dry tonne. Use consistent feed solids and machine settings when comparing batches. Where dissolved organic load is important, measure it separately; better capture of cells and solids does not demonstrate removal of all soluble fermentation residues.

    Solution preparation

    Prepare a 0.1-0.5% solution by mass using clean water. Add powder gradually to moving water to avoid lumps. Allow around one hour for dissolution, adjusting for grade, water quality and temperature. The TDS gives 200-400 rpm as a mixing reference; adapt mixing to the actual tank and impeller. Avoid unnecessary high shear after dissolution. A 0.1% solution contains 1 kg of product per 1,000 kg of final solution. Select the treatment dose separately through controlled trials.

    Packaging storage and handling

    Featured packaging is a 750 kg net big bag. Store the dry product sealed at 0-35 °C, protected from moisture and direct sunlight. The stated shelf life is two years under specified storage conditions. Reseal opened packaging and follow the current SDS for handling and spill cleanup.

    Frequently asked questions

    Can CPAM condition every fermentation sludge equally?

    No. Organism, process chemistry, sludge age and treatment stage can change the response.

    Does this page cover recovery of food or feed biomass?

    It covers wastewater sludge conditioning. Product biomass recovery requires a separate review of the exact polymer and intended use.

    Does a sticky floc mean the dose is too low?

    Not necessarily. Overdosing, unsuitable grade or poor dissolution can also impair drainage.

    Does the two-year shelf life apply to a made-up solution?

    No. It describes dry product stored as directed. Prepared solution needs separate management.

    About Bluwat Chemicals

    Bluwat Chemicals is a China-based manufacturer and exporter of water treatment chemicals and functional polymers. Our business began in 2000, the company was formally established in 2002, and our Yixing factory began production in 2004. Our portfolio includes Blufloc PAM powder and emulsions, BWD-01 Water Decoloring Agent, PAC, PolyDADMAC, Polyamine and ACH. We help customers compare suitable products through wastewater characterization and application testing.

    Discuss the current grade specification, quality documentation and trial requirements with Bluwat when selecting a product.

    Discuss your application

    Send Bluwat the fermentation process, sludge origin, batch variability and dewatering objective to develop a suitable CPAM screening plan.

    Leave Your Message