- Plant-Based Deodorant
- Water Treatment Chemicals
- Coagulant
-
Flocculant
- Polyacrylamide for Textile, Food & Process Industries
- Polyacrylamide for Oil, Gas & Drilling
- Polyacrylamide for Pulp&Paper
- Polyacrylamide for Mining & Mineral Processing
- Polyacrylamide for Sludge Dewatering
- Polyacrylamide for Water & Wastewater Clarification
- Polyacrylamide Emulsion
- Polyacrylamide Powder
- BWD-01 Water Decoloring Agent
Cationic Polyacrylamide CPAM 5-12 Million MW 89% Min Solid for Brewery Wastewater Sludge Dewatering CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag
Product overview
Brewery wastewater treatment sludge can vary with fermentation losses, cleaning operations, upstream flotation and the biological treatment system. Waste activated sludge, anaerobic sludge and chemically separated material may dewater differently. Their source and blend must be identified before comparing polymers.
CPAM supports aggregation of compatible organic sludge into flocs that can retain solids and release water during mechanical dewatering. The preferred molecular weight is the one that performs under the machine's mixing and separation conditions. A higher value within the family range does not by itself guarantee a drier cake.
Product benefits
- Condition compatible organic brewery wastewater sludge before dewatering.
- Compare molecular weight and charge against the actual sludge source.
- Assess drainage and capture through representative transfer conditions.
- Support performance-based selection beyond a single viscosity number.

Technical data
|
Parameter |
Specification |
|
Product family |
Blufloc CPAM powder |
|
Ionic character |
Cationic |
|
Appearance |
Off-white granular powder |
|
Particle size |
20-100 mesh |
|
Molecular weight |
5-12 million depending on grade |
|
Charge or ionic degree |
5-80% cationic charge degree depending on grade |
|
Solid content |
89% minimum |
|
Residual monomer |
0.05% maximum |
|
pH of 1% aqueous solution |
4-6 |
|
Recommended solution concentration |
0.1-0.5% |
|
CAS reference |
9003-05-8 |
|
Featured packaging |
25 kg kraft paper bag |
Molecular weight and charge ranges describe the product family. Confirm the selected grade and current batch specification with Bluwat. The pH of a 1% product solution is a test parameter, not the required plant operating pH.
Application process
Take a representative sample from the sludge feed used by the dewatering machine. Record the contribution from biological and flotation sludge where they are blended. Prepare CPAM separately and compare grades at controlled dose and feed solids. Confirm the selected condition during normal production and after cleaning-related wastewater loads have passed through treatment.
Grade and dosage selection
Screen charge and molecular weight together. Biological sludge structure, digestion and residual coagulants can change the optimum. Use drainage screening for initial comparison, followed by a trial on the intended screw press, belt press or centrifuge. Keep polymer solution age, make-up water and mixing consistent so that preparation differences do not distort the comparison.
Performance evaluation
Record cake dry solids, filtrate or centrate suspended solids, throughput and polymer use per dry tonne. Where digestion is involved, compare similar sludge conditions. Evaluate the effect on return-liquid solids loading as well as on cake transport and handling.
Solution preparation
Prepare a 0.1-0.5% solution by mass using clean water. Add powder gradually to moving water to avoid lumps. Allow around one hour for dissolution, adjusting for grade, water quality and temperature. The TDS gives 200-400 rpm as a mixing reference; adapt mixing to the actual tank and impeller. Avoid unnecessary high shear after dissolution. A 0.1% solution contains 1 kg of product per 1,000 kg of final solution. Select the treatment dose separately through controlled trials.
Packaging storage and handling
Featured packaging is a 25 kg kraft paper bag with an inner plastic liner. Store the dry product sealed at 0-35 °C, protected from moisture and direct sunlight. The stated shelf life is two years under specified storage conditions. Reseal opened packaging and follow the current SDS for handling and spill cleanup.
Frequently asked questions
Can CPAM be used directly in beer production?
This page concerns wastewater sludge conditioning. It does not establish suitability for direct addition to beer or other food products.
Is 12 million molecular weight always preferable?
No. Match molecular weight and charge to the sludge and machine; compare complete dewatering performance.
Can anaerobic and aerobic brewery sludge use one grade?
They may respond differently. Test each actual stream or the normal blend.
Why include filtrate quality in selection?
Poor solids capture can increase the load returned to wastewater treatment even if the cake appears acceptable.
About Bluwat Chemicals
Bluwat Chemicals is a China-based manufacturer and exporter of water treatment chemicals and functional polymers. Our business began in 2000, the company was formally established in 2002, and our Yixing factory began production in 2004. Our portfolio includes Blufloc PAM powder and emulsions, BWD-01 Water Decoloring Agent, PAC, PolyDADMAC, Polyamine and ACH. We help customers compare suitable products through wastewater characterization and application testing.
Discuss the current grade specification, quality documentation and trial requirements with Bluwat when selecting a product.
Discuss your application
Send Bluwat the brewery sludge source, treatment process, feed solids and machine type to discuss CPAM candidates and a comparable dewatering trial.
