- Plant-Based Deodorant
- Water Treatment Chemicals
- Coagulant
-
Flocculant
- Polyacrylamide for Textile, Food & Process Industries
- Polyacrylamide for Oil, Gas & Drilling
- Polyacrylamide for Pulp&Paper
- Polyacrylamide for Mining & Mineral Processing
- Polyacrylamide for Sludge Dewatering
- Polyacrylamide for Water & Wastewater Clarification
- Polyacrylamide Emulsion
- Polyacrylamide Powder
- BWD-01 Water Decoloring Agent
Cationic Polyacrylamide CPAM pH 4-6 in 1% Solution for High-Organic Sludge Conditioning CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag

Product Overview
In high-strength organic wastewater treatment, polymer purchasing should begin with the real separation problem rather than a generic request for PAM. This page addresses sludge rich in proteins, fats, biomass or soluble microbial products. The objective is to create a floc that matches the hydraulic loading, shear and drainage mechanism of the centrifuge, belt press, screw press or filter press. Cationic Polyacrylamide provides long polymer chains that connect destabilized particles into larger aggregates; the cationic charge also helps neutralize many negatively charged organic and biological surfaces.
Sludge Dewatering Problem
The relevant feed is sludge rich in proteins, fats, biomass or soluble microbial products. The main operating difficulty is that organic colloids and extracellular material bind water strongly and can create compressible or sticky floc. The practical target is improved free-water release, fine-solids capture, manageable cake and a stable operating window.
How CPAM Supports the Separation Process
- Particle contact: The prepared CPAM solution disperses through the conditioned sludge.
- Charge response: The selected charge level reduces electrostatic stability.
- Polymer bridging: Extended chains connect multiple particles into floc.
- Equipment separation: Gravity, pressure or centrifugal separation mechanism.
- Controlled optimization: Dose, concentration, and mixing energy are adjusted together.
Recommended Addition Point and Equipment Fit
Introduce the fully activated polymer after equalization, stabilization and removal of free oil or coarse solids, before dewatering. The point must provide uniform contact without exposing newly formed floc to unnecessary high shear.
Grade Selection Guidance
BLUFLOC CPAM is available across a 5-12 million molecular-weight range and 5-80% charge-degree range. Key steps for selection:
- Test fresh, representative sludge at the normal feed-solids concentration.
- Keep upstream chemistry and mechanical settings constant.
- Compare at least three doses for each candidate grade.
BLUFLOC Powder PAM Typical Supply Range
| Property | Specified Range | Practical Relevance |
|---|---|---|
| Appearance | Off-white granular powder | Dry, free-flowing product |
| Ionic type | Cationic | Select by sludge surface chemistry |
| Molecular weight | 5-12 million | Screen for floc size and shear |
| Charge range | 5-80% charge degree | Match actual sludge demand |
Polymer Solution Preparation
- Fill a clean make-down tank with water and start moderate agitation.
- Meter dry powder slowly to avoid fish-eyes or gel lumps.
- Prepare a 0.1-0.5% solution.
- Agitate at 200-400 rpm for about one hour.
Troubleshooting
| Small or weak floc | Verify complete dissolution, increase contact gently. |
| Cloudy filtrate | Check underdosing, high shear, or equipment loading. |
| Sticky sludge | Reduce dose, improve dilution and dispersion. |
Why Source BLUFLOC PAM from Bluwat Chemicals
- Anionic, cationic and nonionic powder ranges.
- Technical discussion based on sludge source and equipment.
- Jar-test samples available for evaluation.
- Export experience serving multiple global markets.
Request a Sludge Dewatering Evaluation
Send Bluwat Chemicals the sludge source, daily flow, feed-solids concentration, current polymer and dose, and the main operating problem. We can then propose a bench-to-equipment trial plan.










