- Plant-Based Deodorant
- Water Treatment Chemicals
- Coagulant
-
Flocculant
- Polyacrylamide for Textile, Food & Process Industries
- Polyacrylamide for Oil, Gas & Drilling
- Polyacrylamide for Pulp&Paper
- Polyacrylamide for Mining & Mineral Processing
- Polyacrylamide for Sludge Dewatering
- Polyacrylamide for Water & Wastewater Clarification
- Polyacrylamide Emulsion
- Polyacrylamide Powder
- BWD-01 Water Decoloring Agent
Foam Control Agent for Flue Gas Desulfurization Wastewater
Application Overview
High dissolved solids, fine particles and process additives can stabilize foam during collection, oxidation and wastewater conditioning.
BWF160 is listed for flue-gas desulfurization systems and provides a practical liquid feed format for aqueous treatment lines.
Why Foam Control Matters
In flue gas desulfurization wastewater, uncontrolled foam is not only a visual issue. It can reduce usable tank volume, cause overflow, contaminate walkways, interfere with level instruments and carry solids or liquid into downstream units. A suitable defoamer should therefore be assessed for both immediate foam collapse and resistance to re-foaming under real mixing, pumping or aeration conditions.
Note: BWF160 should be treated as one component of process control. Operators should also investigate the underlying source of foam, including surfactant loading, production changes, biological conditions, aeration intensity, recycle streams and hydraulic turbulence.
Key Product Features
- Fast initial defoaming for active surface foam.
- Continued foam suppression under water-based process conditions.
- Nonionic formulation for broad site-specific compatibility evaluation.
- Easy dispersion with no floating-oil appearance when properly selected and applied.
- Flexible direct, drip, spray or turbulent-inlet dosing options.
- Designed for water-treatment use and described as not causing secondary water pollution under intended application.
Typical Technical Data
| Property | Specification / Description |
| Product model | BWF160 |
| Product type | Water-treatment silicone defoamer / antifoam emulsion |
| Active composition | Polysiloxane with synergist, emulsifier and dispersant |
| Appearance | Milky-white flowable liquid |
| Ionic character | Nonionic |
| pH | 6-8 |
| Non-volatile content | 12-20% |
| Centrifugal stability | No separation after 3,000 rpm for 20 minutes |
| General reference dosage | Approximately 50-300 ppm, subject to actual foam conditions |
| Optional pre-dilution | Clean cold water; 1-3-fold dilution for drip or spray application |
| Packaging | 25 kg or 200 kg plastic drums |
| Shelf life | One year under normal-temperature storage; protect from freezing |
Note: Typical information should be confirmed against the current commercial TDS and the actual supplied batch.
Recommended Use and Dosing
The general reference dosage is approximately 50-300 ppm. This is a screening range rather than a guaranteed fixed dose. Actual demand depends on surfactant type, contaminant concentration, temperature, pH, dissolved and suspended solids, aeration, mixing energy and the required duration of control.
Suggested Site Evaluation
- Record the untreated foam height and operating conditions.
- Start at a conservative dose and increase stepwise.
- Measure both collapse time and the interval before foam returns.
- Track foam height, slurry compatibility, separation behavior and effective dose.
- Confirm that clarification, biological treatment, filtration or discharge performance remains acceptable.
Process Integration Guidance
Test with actual chloride level, suspended solids and reagent program because high-salinity matrices can change emulsion behavior.
Packaging, Handling and Storage
BWF160 is packed in 25 kg or 200 kg plastic drums. Store sealed containers at normal temperature in accordance with general chemical-storage practice. The stated shelf life is one year. Protect the product from freezing, rotate stock on a first-in-first-out basis and inspect emulsion appearance before use after extended storage.
Why Work with Bluwat Chemicals
Bluwat Chemicals supplies water-treatment chemicals for industrial and municipal applications. The commercial approach combines product selection, sample evaluation and application discussion so that buyers can qualify a grade against their own water, equipment and treatment objectives.
Frequently Asked Questions
Q: Is BWF160 a silicone defoamer?
A: Yes. The supplied information describes a polysiloxane-based formulation with synergist, emulsifier and dispersant.
Q: Can BWF160 be diluted before dosing?
A: Yes. Clean cold water can be used for a 1-3-fold pre-dilution when drip or spray distribution is preferred.
Q: What is the recommended dosage?
A: A general reference range is approximately 50-300 ppm.
Q: Can it be used in biological wastewater treatment?
A: The product is described for municipal biological treatment systems and as not affecting activated-sludge bacterial reproduction under intended use.
