request to quote
Leave Your Message
Industrial Defoamer for High-Foaming Wastewater Systems
Defoamer
Products Categories
Featured Products

Industrial Defoamer for High-Foaming Wastewater Systems

BWF160 is a nonionic silicone defoamer developed for high-foaming industrial wastewater. It is supplied as a milky-white flowable emulsion designed for rapid foam knockdown, continued suppression and easy dispersion in water-based systems. The product has a stated pH of 6-8 and a general reference dosage of 50-300 ppm, with final use levels determined by the actual wastewater and operating conditions.

    Application Overview

    High-foam streams can consume tank capacity, overwhelm covers and transfer foam into downstream equipment.

    The recommended reference range of 50-300 ppm gives a practical starting window for screening different foam loads.

    Why Foam Control Matters

    In high-foaming industrial wastewater, uncontrolled foam is not only a visual issue. It can reduce usable tank volume, cause overflow, contaminate walkways, interfere with level instruments and carry solids or liquid into downstream units. A suitable defoamer should therefore be assessed for both immediate foam collapse and resistance to re-foaming under real mixing, pumping or aeration conditions.

    BWF160 should be treated as one component of process control. Operators should also investigate the underlying source of foam, including surfactant loading, production changes, biological conditions, aeration intensity, recycle streams and hydraulic turbulence.

    Key Product Features

    • Fast initial defoaming for active surface foam.
    • Continued foam suppression under water-based process conditions.
    • Nonionic formulation for broad site-specific compatibility evaluation.
    • Easy dispersion with no floating-oil appearance when properly selected and applied.
    • Flexible direct, drip, spray or turbulent-inlet dosing options.
    • Designed for water-treatment use and described as not causing secondary water pollution under intended application.
    BWF160 silicone defoamer for high-foaming industrial wastewater in a water-treatment application scene

    Typical Technical Data

    Property Specification / Description
    Product model BWF160
    Product type Water-treatment silicone defoamer / antifoam emulsion
    Active composition Polysiloxane with synergist, emulsifier and dispersant
    Appearance Milky-white flowable liquid
    Ionic character Nonionic
    pH 6-8
    Non-volatile content 12-20%
    Centrifugal stability No separation after 3,000 rpm for 20 minutes
    General reference dosage Approximately 50-300 ppm, subject to actual foam conditions
    Optional pre-dilution Clean cold water; 1-3-fold dilution for drip or spray application
    Packaging 25 kg or 200 kg plastic drums
    Shelf life One year under normal-temperature storage; protect from freezing

    Note: Typical information should be confirmed against the current commercial TDS and the actual supplied batch.

    Recommended Use and Dosing

    The general reference dosage is approximately 50-300 ppm. This is a screening range rather than a guaranteed fixed dose. Actual demand depends on surfactant type, contaminant concentration, temperature, pH, dissolved and suspended solids, aeration, mixing energy and the required duration of control.

    BWF160 can be added directly at an inlet with good wastewater turbulence. Where broad surface contact is needed, it may be pre-diluted with clean cold water at a 1-3-fold dilution and applied by drip or spray to the foam-concentrated area.

    Suggested Site Evaluation

    • Record the untreated foam height and operating conditions.
    • Start at a conservative dose and increase stepwise.
    • Measure both collapse time and the interval before foam returns.
    • Track effective minimum dose, foam recurrence, process throughput and downstream carryover.
    • Confirm that clarification, biological treatment, filtration or discharge performance remains acceptable.

    Process Integration Guidance

    Start at the low end in a controlled test, increase stepwise and evaluate persistence rather than relying on a one-time visual knockdown.

    Packaging, Handling and Storage

    BWF160 is packed in 25 kg or 200 kg plastic drums. Store sealed containers at normal temperature in accordance with general chemical-storage practice.

    Why Work with Bluwat Chemicals

    Bluwat Chemicals supplies water-treatment chemicals for industrial and municipal applications. The commercial approach combines product selection, sample evaluation and application discussion.

    Frequently Asked Questions

    Q: Is BWF160 a silicone defoamer?
    A: Yes. The supplied information describes a polysiloxane-based formulation.
    Q: Can BWF160 be diluted before dosing?
    A: Yes. Clean cold water can be used for a 1-3-fold pre-dilution.
    Q: What is the recommended dosage?
    A: A general reference range is approximately 50-300 ppm.
    Q: Can it be used in biological wastewater treatment?
    A: The product is described for municipal biological treatment systems and as not affecting activated-sludge bacterial reproduction under intended use.
    Q: How should it be stored?
    A: Keep the sealed drums at normal temperature, protect them from freezing and use first-in-first-out stock rotation.

    Leave Your Message