Bluwat Tests a Three Step Process for NDT Wastewater Color Removal
Bluwat Chemicals has conducted a laboratory treatment trial on wastewater from a manufacturing inspection process. The recorded sequence used Composite No. 2 decoloring agent at 2000 ppm, followed by alkali addition to adjust the pH to 7–8, and then Anionic Polyacrylamide (PAM) for flocculation.
The trial provides a practical reference for evaluating chemical treatment of colored inspection wastewater. The dosage and pH describe this particular test and require verification before use with another wastewater stream.
What Is Manufacturing Inspection Wastewater
Manufacturing inspection wastewater refers to wastewater generated by relevant testing, rinsing and cleaning operations during industrial quality control. Non-destructive testing (NDT) is used to examine components without damaging their intended function.
Liquid penetrant testing is one NDT method that uses visible or fluorescent inspection materials. Some penetrant processes include water rinsing. However, NDT covers several methods, so wastewater characterization should begin with the actual inspection and cleaning process.
Treatment Sequence Used in the Trial
| Step | Treatment operation | Recorded condition |
| 1 | Add Composite No. 2 decoloring agent | 2000 ppm |
| 2 | Add alkali to adjust the pH | pH 7–8 |
| 3 | Add anionic PAM | Flocculation |

Step 1 Add the Decoloring Agent
Composite No. 2 decoloring agent was added first as the color-removal treatment. This product designation identifies the agent used in the recorded trial.
The 2000 ppm dosage is a sample-specific test condition. When preparing follow-up trials, the dosing record should also identify the stock solution concentration and whether dosage is expressed on a supplied-product or active-content basis.
Step 2 Adjust the pH to 7 to 8
Alkali was added after the decoloring agent to bring the wastewater to pH 7–8. This establishes the recorded pH condition before the flocculation stage.
For another sample, the suitable pH should be checked through comparative tests rather than adopted from this trial alone.
Step 3 Add Anionic PAM for Flocculation
Anionic PAM was added after pH adjustment. Polymeric Flocculants help bring small particles and aggregates together into larger flocs, supporting subsequent solid-liquid separation.
The appropriate PAM grade and dosage depend on the wastewater response. Floc appearance, separation behavior and the quality of the separated water should be considered together.
Evaluating the Treatment Beyond the Video
A treatment video can help operators observe mixing, floc development and phase separation. A complete evaluation should also compare untreated and treated samples for color, turbidity or suspended solids, COD and final pH, according to the plant's treatment objectives.
Visible decolorization alone does not establish COD removal or discharge compliance. Follow-up trials should also examine sludge production and compatibility with the existing separation equipment.
About Bluwat Chemicals
Bluwat Chemicals is a China-based manufacturer and global supplier of water Treatment Chemicals. Its business began in 2000, the company was formally established in 2002, and its Yixing factory began production in 2004.
Bluwat's portfolio includes Water Decoloring Agents, polyacrylamide, PAC, PolyDADMAC and polyamine for industrial and municipal treatment applications. Its product range supports the evaluation of chemical combinations for different wastewater characteristics.
Frequently Asked Questions
Is 2000 ppm the recommended dosage for all NDT wastewater
No. It is the recorded dosage for this sample. Other wastewater streams require their own dosage evaluation.
Why was anionic PAM added after pH adjustment
It was the flocculation stage in this trial. Its suitability should be confirmed alongside the selected decoloring agent, pH and separation requirements.
