What Happens When Soft Drinks Become Wastewater?
A bottle of soft drink is designed for consumption, not disposal.
However, beverage factories, warehouses, distributors and retailers may occasionally need to dispose of expired products, off-specification batches, rejected filling runs or liquids recovered during PACkaging changes.
What happens when these beverages enter a wastewater system?
The answer can be surprising. Even though a soft drink contains mostly water, its sugar, organic acids, colorants and other ingredients can create a wastewater stream with an extremely high pollution load.
Let us examine a 500 mL bottle of cola-style beverage as a simple example.
How Sugar Creates an Extremely High Oxygen Demand
Assume that a 500 mL beverage contains approximately 53 grams of sugar.
The equivalent sugar concentration is:
53 g ÷ 0.5 L = 106 g/L
For an illustrative calculation, the sugar can be treated as sucrose. Its complete oxidation can be expressed as:
C₁₂H₂₂O₁₁ + 12O₂ → 12CO₂ + 11H₂O
One mole of sucrose weighs approximately 342 grams and theoretically consumes 384 grams of oxygen during complete oxidation.
1 g sucrose ≈ 1.123 g theoretical oxygen demand
106 g/L × 1.123 ≈ 119 g O₂/L
This is equivalent to approximately:
119,000 mg/L COD-equivalent

| Calculation item | Illustrative value |
|---|---|
| Beverage volume | 500 mL |
| Sugar in the bottle | 53 g |
| Sugar concentration | 106 g/L |
| Oxygen-demand factor for sucrose | 1.123 g O₂/g |
| Total oxygen demand in the bottle | Approximately 59.5 g O₂ |
| Estimated COD-equivalent concentration | Approximately 119,000 mg/L |
Important Technical Note
The value of 119,000 mg/L is a theoretical oxygen-demand estimate based only on the stated sugar content. It is not a laboratory COD test result.
Why Does a Sugary Drink Create Pollution?
COD does not measure how dirty a liquid looks. It represents the amount of oxygen required to chemically oxidize the substances in the water.
If a large quantity of sugary beverage enters a river, lake or poorly controlled wastewater system, microorganisms begin consuming the sugar. A severe oxygen deficit can:
- Stress or kill fish and other aquatic organisms
- Create anaerobic conditions
- Produce unpleasant odors
- Disturb the biological balance of the receiving water
- Overload biological Wastewater Treatment systems
What About Phosphorus?
Some cola-style beverages contain phosphoric acid. As an illustration, this can be rounded to approximately 170 mg/L as phosphorus.
Acidity Is Another Treatment Challenge
Many soft drinks are acidic. Depending on the formulation, their pH may fall approximately within the 2.5–4.2 range.
Can the Color Simply Settle Out?
Dark cola-style beverages often contain dissolved caramel coloring. Because much of this color is dissolved, conventional gravity settling alone may provide little color removal.
A Practical Treatment Strategy
1. Prevent and Segregate Concentrated Product Losses
2. Use Flow and Load Equalization
3. Adjust the pH
4. Apply Physicochemical Pretreatment When Needed
5. Remove the Formed Floc
6. Use Biological Treatment for Dissolved Organic Load
7. Polish the Effluent and Manage the Sludge
Where Bluwat Chemicals Can Support the Process
Bluwat Chemicals supplies water Treatment Chemicals for food, beverage and industrial wastewater applications.
- Polyaluminium Chloride: Support coagulation and phosphate removal.
- BWD-01 Water Decoloring Agent: Evaluated for difficult colored wastewater.
- Polyacrylamide Flocculants: Help build larger and stronger flocs.
Frequently Asked Questions
Is an expired soft drink automatically classified as hazardous waste?
Not necessarily. However, even a non-hazardous beverage can create a very high organic pollution load.
Can beverage waste be discharged directly into a municipal sewer?
This depends on the local discharge permit, sewer acceptance limits and the caPACity of the receiving treatment plant.










