request to quote
Leave Your Message
PHPA Powder for Drilling Fluid Stability Across pH 5-14
Polyacrylamide Powder
Products Categories
Featured Products

PHPA Powder for Drilling Fluid Stability Across pH 5-14

BLUFLOC PHPA powder is a water-soluble anionic-character polymer candidate for pH 5-14 drilling fluid. Available TDS-listed grades include HA6518, HA8520, HAA6520, and HAA7525; final selection requires current grade documents and representative testing.

    Product Introduction

    The family TDS states an effective pH range of 5-14, but system stability still depends on water chemistry, additives, temperature, and exposure time.

    BLUFLOC powder PHPA is described in the supplied family TDS as a water-soluble copolymer of anionic character used in drilling-fluid and selected oilfield applications. The four powder grades span very-high and ultra-high molecular-weight classes with medium or high charge. The table does not assign a unique application to any grade, so the target duty, water, formation, mixing system, and representative test results must decide selection.

    Bluwat Chemicals PHPA powder manufacturing, quality control, bagging, palletizing, and export facility

    Application Challenges

    • The family TDS states an effective pH range of 5-14, but system stability still depends on water chemistry, additives, temperature, and exposure time.
    • Insufficient carrying capacity at the relevant annular shear rates
    • Excess filtrate or a permeable filter cake in a water-based system
    • Overtreatment that raises pressure loss or equivalent circulating density

    How PHPA Powder Works

    Hydrated high-molecular-weight PHPA contributes viscosity, protective-colloid behavior, particle association, and filter-cake modification. The observed balance between carrying capacity and fluid loss depends on polymer grade, hydration, clay and solids, dissolved ions, shear, temperature, and companion additives.

    Molecular-weight and charge classes describe broad polymer behavior, not a guaranteed field result. Powder dispersion, complete hydration, solution concentration, water quality, pH, solids, shear, aging, temperature, and companion chemistry can materially change observed performance.

    Important selection note: The grades below are screening candidates, not a fixed prescription. Final grade, solution concentration, process dose, preparation, addition point, and acceptance criteria require current grade documentation and representative laboratory and field or plant trials.

    Recommended BLUFLOC Grade Screening

    Grade MW Class Charge Screening Position
    HA6518 Very High Medium Screening candidate; selection requires representative testing
    HA8520 Very High High Screening candidate; selection requires representative testing
    HAA6520 Ultra High Medium Screening candidate; selection requires representative testing
    HAA7525 Ultra High High Screening candidate; selection requires representative testing

    TDS Specifications

    Powder Grade Molecular Weight Class Charge Class
    HA6518 Very High Medium
    HA8520 Very High High
    HAA6520 Ultra High Medium
    HAA7525 Ultra High High
    Family TDS Item Powder Product Value / Guidance
    Product form Powder
    Appearance White powder
    Solid content 89% min
    Bulk density About 0.8
    Specific gravity at 25 degrees C 1.01-1.10
    Shelf life 2 years
    Packaging 25 kg kraft paper bags with inner PE liners, palletized
    Recommended solution concentration 0.1-0.3% solids
    Recommended make-up water temperature 10-40 degrees C
    Effective pH range 5-14
    TDS mixing guidance About 1 hour; propeller stirrer at 200-500 rpm

    TDS confirmation note: Exact active content, viscosity, specification limits, shelf life, and preparation instructions should be confirmed on the current grade-specific TDS and order specification.

    Powder Preparation and Dosing Guidance

    The supplied family TDS recommends preparing powder PHPA at 0.1-0.3% solids with make-up water at 10-40 degrees C and an effective pH range of 5-14. Efficient dispersion is required; a polymer eductor or commercial dry-powder feeder is suggested. After dispersion into agitated water, continue stirring for about one hour. The TDS notes a propeller-type stirrer at 200-500 rpm and recommends separate stock make-up and solution holding tanks. The prepared anionic solutions are described as stable for up to one week. Aluminum, zinc, copper, and iron should be avoided in the make-up system. Confirm all details against the current grade-specific TDS, SDS, equipment manual, and order specification.

    Scale-up warning: Do not scale a laboratory rpm directly to a full tank. Validate impeller, tank geometry, feed distribution, water flow, residence time, shear, and solution quality at the intended production rate.

    Application Advantages to Evaluate

    • Potential fit for phpa powder ph 5-14 drilling fluid after representative qualification
    • Four TDS-listed molecular-weight and charge class combinations for comparative screening
    • Powder format with at least 89% solids stated in the family TDS
    • PHPA-family compatibility statement covering biopolymers, PAC, and CMC, subject to formulation testing
    • Palletized 25 kg lined bag format for storage, export, and controlled field make-down

    Recommended Evaluation and Dosing Workflow

    1. Establish untreated rheology, gels, filtration, solids, and hydraulic baselines.
    2. Prepare candidate powder grades at a verified concentration and full hydration.
    3. Measure a dose response across viscosity, yield behavior, gels, filtration, and screenability.
    4. Age and contaminate the complete formulation under representative temperature and shear.
    5. Confirm pumpability, hole cleaning, pressure response, solids control, and treatment economics in a controlled trial.

    Product Selection and Compatibility

    Treat the pH range as a family preparation/application statement, not a guarantee of unchanged viscosity at every pH.

    Compare candidates on polymer solids and achieved operating outcome. Price per bag can be misleading when hydration, make-down losses, dose, equipment throughput, drilling response, fluid recovery, waste, logistics, and downstream costs differ.

    Operating Indicators to Record

    • Solution appearance
    • Viscosity retention
    • Rheology and filtration
    • Additive compatibility
    • Aging response

    Troubleshooting Note

    If performance drifts: If solution performance changes after pH adjustment, check order of addition, local high-pH exposure, salts, and mixing.

    Packaging, Storage, and Safe Handling

    The supplied TDS states that powder products are packed in 25 kg kraft paper bags with inner PE liners and are palletized. Store unopened material in its original packaging in a cool, dry place away from heat, flame, and direct sunlight. The family table states a two-year shelf life for powder products. Protect opened bags from moisture and contamination. Follow the current SDS for personal protection, dust control, spill cleanup, transport, and disposal. Wet polymer is extremely slippery; contain and clean spills promptly.

    Why Choose Bluwat Chemicals

    • More than 25 years of water-treatment chemical manufacturing experience since 2000.
    • Three production bases supporting factory-direct supply, batch planning, and export coordination.
    • Export experience serving customers in more than 80 countries and regions.
    • Technical screening support using the customer's formation, drilling fluid, brine, produced water, or make-up water.
    • TDS, SDS, COA format, packing details, and available company-level certification documents for commercial review.

    For phpa powder ph 5-14 drilling fluid, Bluwat can review the target duty, water and formation data, make-down equipment, proposed test methods, and the four TDS-listed powder classes with the customer. Company-level certifications or management-system documents should not be represented as grade-specific application approvals unless the applicable certificate explicitly says so.

    Quality Control and Technical Support

    • Confirm the named grade, current specification limits, order requirements, and documentation before production.
    • Compare candidate grades under the same water chemistry, solids, temperature, shear, mixing, and aging conditions.
    • Record raw-material lot, solution concentration, hydration time, mixing energy, and test method for traceable evaluation.
    • Scale up only after laboratory acceptance criteria and a controlled field or plant trial have been agreed.

    Frequently Asked Questions

    QDoes pH 5-14 mean identical performance throughout?

    No. It indicates a broad effective range in the TDS; grade-specific and formulation performance must be tested.

    QShould acid or caustic contact dry powder directly?

    Avoid concentrated local contact; adjust water or the complete system according to a validated procedure.

    QIs the highest molecular-weight class always best?

    No. Higher chain length can increase viscosity and bridging, but dispersion, shear, pumpability, solids control, and the target fluid window decide the grade.

    QCan PHPA universally replace PAC or CMC?

    No. The TDS states compatibility, not interchangeability. Each additive can contribute differently to filtration and rheology.

    Leave Your Message