- Plant-Based Deodorant
- Water Treatment Chemicals
- Coagulant
-
Flocculant
- Polyacrylamide for Textile, Food & Process Industries
- Polyacrylamide for Oil, Gas & Drilling
- Polyacrylamide for Pulp&Paper
- Polyacrylamide for Mining & Mineral Processing
- Polyacrylamide for Sludge Dewatering
- Polyacrylamide for Water & Wastewater Clarification
- Polyacrylamide Emulsion
- Polyacrylamide Powder
- BWD-01 Water Decoloring Agent
PHPA Powder for Horizontal Directional Drilling Fluids
Product Introduction
HDD fluids must carry cuttings, stabilize the bore, control fluid loss, and remain pumpable through a long circulation path.
BLUFLOC powder PHPA is described in the supplied family TDS as a water-soluble copolymer of anionic character used in drilling-fluid and selected oilfield applications. The four powder grades span very-high and ultra-high molecular-weight classes with medium or high charge. The table does not assign a unique application to any grade, so the target duty, water, formation, mixing system, and representative test results must decide selection.

Application Challenges
- HDD fluids must carry cuttings, stabilize the bore, control fluid loss, and remain pumpable through a long circulation path.
- Several simultaneous objectives: stability, cleaning, fluid recovery, and equipment limits
- Variable formations and water chemistry along the same project
- Laboratory shear and residence time that differ from field circulation
How PHPA Powder Works
Across oil, gas, water-well, geological, coal, mineral, and trenchless drilling, PHPA may contribute shale control, carrying capacity, fluid-loss control, drilled-solids flocculation, and lubricity. The priority changes with drilling method, geology, circulation, fluid reuse, and surface equipment, so selection must follow project outcomes.
Molecular-weight and charge classes describe broad polymer behavior, not a guaranteed field result. Powder dispersion, complete hydration, solution concentration, water quality, pH, solids, shear, aging, temperature, and companion chemistry can materially change observed performance.
Important selection note: The grades below are screening candidates, not a fixed prescription. Final grade, solution concentration, process dose, preparation, addition point, and acceptance criteria require current grade documentation and representative laboratory and field or plant trials.
Recommended BLUFLOC Grade Screening
| Grade | MW Class | Charge | Screening Position |
| HA6518 | Very High | Medium | Screening candidate; selection requires representative testing |
| HA8520 | Very High | High | Screening candidate; selection requires representative testing |
| HAA6520 | Ultra High | Medium | Screening candidate; selection requires representative testing |
| HAA7525 | Ultra High | High | Screening candidate; selection requires representative testing |
TDS Specifications
| Powder Grade | Molecular Weight Class | Charge Class |
| HA6518 | Very High | Medium |
| HA8520 | Very High | High |
| HAA6520 | Ultra High | Medium |
| HAA7525 | Ultra High | High |
| Family TDS Item | Powder Product Value / Guidance |
| Product form | Powder |
| Appearance | White powder |
| Solid content | 89% min |
| Bulk density | About 0.8 |
| Specific gravity at 25 degrees C | 1.01-1.10 |
| Shelf life | 2 years |
| Packaging | 25 kg kraft paper bags with inner PE liners, palletized |
| Recommended solution concentration | 0.1-0.3% solids |
| Recommended make-up water temperature | 10-40 degrees C |
| Effective pH range | 5-14 |
| TDS mixing guidance | About 1 hour; propeller stirrer at 200-500 rpm |
TDS confirmation note: Exact active content, viscosity, specification limits, shelf life, and preparation instructions should be confirmed on the current grade-specific TDS and order specification.
Powder Preparation and Dosing Guidance
The supplied family TDS recommends preparing powder PHPA at 0.1-0.3% solids with make-up water at 10-40 degrees C and an effective pH range of 5-14. Efficient dispersion is required; a polymer eductor or commercial dry-powder feeder is suggested. After dispersion into agitated water, continue stirring for about one hour. The TDS notes a propeller-type stirrer at 200-500 rpm and recommends separate stock make-up and solution holding tanks. The prepared anionic solutions are described as stable for up to one week. Aluminum, zinc, copper, and iron should be avoided in the make-up system. Confirm all details against the current grade-specific TDS, SDS, equipment manual, and order specification.
Scale-up warning: Do not scale a laboratory rpm directly to a full tank. Validate impeller, tank geometry, feed distribution, water flow, residence time, shear, and solution quality at the intended production rate.
Application Advantages to Evaluate
- Potential fit for phpa powder for horizontal directional drilling after representative qualification
- Four TDS-listed molecular-weight and charge class combinations for comparative screening
- Powder format with at least 89% solids stated in the family TDS
- PHPA-family compatibility statement covering biopolymers, PAC, and CMC, subject to formulation testing
- Palletized 25 kg lined bag format for storage, export, and controlled field make-down
Recommended Evaluation and Dosing Workflow
- Define drilling method, geology, water source, circulation layout, disposal constraints, and success criteria.
- Build a representative base fluid and measure untreated performance for the priority outcomes.
- Screen the four powder grades with the actual cuttings, salts, solids, and companion additives.
- Check make-down, pumps, shear, solids separation, fluid reuse, cleanup, and environmental controls.
- Use a staged field trial with stop criteria and report treatment cost per drilled interval or treated fluid volume.
Product Selection and Compatibility
Model the bore and recycling system and test formation cuttings, source water, screens, pumps, and disposal together.
Compare candidates on polymer solids and achieved operating outcome. Price per bag can be misleading when hydration, make-down losses, dose, equipment throughput, drilling response, fluid recovery, waste, logistics, and downstream costs differ.
Operating Indicators to Record
- Return flow and cuttings
- Pump pressure
- Fluid loss
- Recycling efficiency
- Bore stability
Troubleshooting Note
If performance drifts: If returns deteriorate while viscosity remains high, investigate losses, bed formation, reamer loading, and recycling-system capacity.
Packaging, Storage, and Safe Handling
The supplied TDS states that powder products are packed in 25 kg kraft paper bags with inner PE liners and are palletized. Store unopened material in its original packaging in a cool, dry place away from heat, flame, and direct sunlight. The family table states a two-year shelf life for powder products. Protect opened bags from moisture and contamination. Follow the current SDS for personal protection, dust control, spill cleanup, transport, and disposal. Wet polymer is extremely slippery; contain and clean spills promptly.
Why Choose Bluwat Chemicals
- More than 25 years of water-treatment chemical manufacturing experience since 2000.
- Three production bases supporting factory-direct supply, batch planning, and export coordination.
- Export experience serving customers in more than 80 countries and regions.
- Technical screening support using the customer's formation, drilling fluid, brine, produced water, or make-up water.
- TDS, SDS, COA format, packing details, and available company-level certification documents for commercial review.
For phpa powder for horizontal directional drilling, Bluwat can review the target duty, water and formation data, make-down equipment, proposed test methods, and the four TDS-listed powder classes with the customer. Company-level certifications or management-system documents should not be represented as grade-specific application approvals unless the applicable certificate explicitly says so.
Quality Control and Technical Support
- Confirm the named grade, current specification limits, order requirements, and documentation before production.
- Compare candidate grades under the same water chemistry, solids, temperature, shear, mixing, and aging conditions.
- Record raw-material lot, solution concentration, hydration time, mixing energy, and test method for traceable evaluation.
- Scale up only after laboratory acceptance criteria and a controlled field or plant trial have been agreed.
Frequently Asked Questions
No. Geometry, formation, pumps, recycling, and project constraints differ.
Source water, formation samples, rheology, filtration, cuttings transport, recycling, and cleanup.
Not safely without validation. Geology, water, equipment, flow, and disposal requirements can change the optimum program.
Use project outcomes such as returns quality, cuttings integrity, viscosity, fluid loss, bore stability, torque, pressure, consumption, and waste.










