request to quote
Leave Your Message
Water-Dispersible Defoaming Agent for Wastewater Treatment Plants
Defoamer
Products Categories
Featured Products

Water-Dispersible Defoaming Agent for Wastewater Treatment Plants

BWF160 is a nonionic silicone defoamer developed for wastewater treatment plants. It is supplied as a milky-white flowable emulsion designed for rapid foam knockdown, continued suppression and easy dispersion in water-based systems. The product has a stated pH of 6-8 and a general reference dosage of 50-300 ppm, with final use levels determined by the actual wastewater and operating conditions.

    Application Overview

    Poorly dispersed products may form surface slicks, leave local overdosing zones or deliver inconsistent control across large basins.

    BWF160 is a milky-white, flowable emulsion developed for easy distribution in aqueous systems.

    Why Foam Control Matters

    In wastewater treatment plants, uncontrolled foam is not only a visual issue. It can reduce usable tank volume, cause overflow, contaminate walkways, interfere with level instruments and carry solids or liquid into downstream units. A suitable defoamer should therefore be assessed for both immediate foam collapse and resistance to re-foaming under real mixing, pumping or aeration conditions.

    BWF160 should be treated as one component of process control. Operators should also investigate the underlying source of foam, including surfactant loading, production changes, biological conditions, aeration intensity, recycle streams and hydraulic turbulence.

    Key Product Features
    • Fast initial defoaming for active surface foam.
    • Continued foam suppression under water-based process conditions.
    • Nonionic formulation for broad site-specific compatibility evaluation.
    • Easy dispersion with no floating-oil appearance when properly selected and applied.
    • Flexible direct, drip, spray or turbulent-inlet dosing options.
    • Designed for water-treatment use and described as not causing secondary water pollution under intended application.
    BWF160 silicone defoamer for wastewater treatment plants in a water-treatment application scene
    Typical Technical Data
    Property Specification / Description
    Product model BWF160
    Product type Water-treatment silicone defoamer / antifoam emulsion
    Active composition Polysiloxane with synergist, emulsifier and dispersant
    Appearance Milky-white flowable liquid
    Ionic character Nonionic
    pH 6-8
    Non-volatile content 12-20%
    Centrifugal stability No separation after 3,000 rpm for 20 minutes
    General reference dosage Approximately 50-300 ppm, subject to actual foam conditions
    Optional pre-dilution Clean cold water; 1-3-fold dilution for drip or spray application
    Packaging 25 kg or 200 kg plastic drums
    Shelf life One year under normal-temperature storage; protect from freezing

    Note: Typical information should be confirmed against the current commercial TDS and the actual supplied batch.

    Recommended Use and Dosing

    The general reference dosage is approximately 50-300 ppm. This is a screening range rather than a guaranteed fixed dose. Actual demand depends on surfactant type, contaminant concentration, temperature, pH, dissolved and suspended solids, aeration, mixing energy and the required duration of control.

    BWF160 can be added directly at an inlet with good wastewater turbulence. Where broad surface contact is needed, it may be pre-diluted with clean cold water at a 1-3-fold dilution and applied by drip or spray to the foam-concentrated area. Use clean equipment and avoid preparing more diluted product than the operation can use promptly.

    Suggested Site Evaluation
    • Record the untreated foam height and operating conditions.
    • Start at a conservative dose and increase stepwise.
    • Measure both collapse time and the interval before foam returns.
    • Track dispersion time, surface uniformity, foam reduction and absence of localized residue.
    • Confirm that clarification, biological treatment, filtration or discharge performance remains acceptable.
    Process Integration Guidance

    Provide adequate mixing without excessive shear. A clean-water pre-dilution can improve coverage when the feed point is wide or difficult to access.

    When PAC, PolyDADMAC, polyamine, decoloring agent or polyacrylamide is also used, conduct a compatibility trial with the full treatment sequence. Foam reduction should not be evaluated in isolation from floc formation, settling, flotation, sludge dewatering or final-water quality.

    Packaging, Handling and Storage

    BWF160 is packed in 25 kg or 200 kg plastic drums. Store sealed containers at normal temperature in accordance with general chemical-storage practice. The stated shelf life is one year. Protect the product from freezing, rotate stock on a first-in-first-out basis and inspect emulsion appearance before use after extended storage.

    Why Work with Bluwat Chemicals

    Bluwat Chemicals supplies water-treatment chemicals for industrial and municipal applications. The commercial approach combines product selection, sample evaluation and application discussion so that buyers can qualify a grade against their own water, equipment and treatment objectives. For a new project, provide the wastewater source, current process, daily flow, foam location, temperature, pH and any existing defoamer information to support a more relevant recommendation.

    Frequently Asked Questions
    Q: Is BWF160 a silicone defoamer? A: Yes. The supplied information describes a polysiloxane-based formulation with synergist, emulsifier and dispersant.
    Q: Can BWF160 be diluted before dosing? A: Yes. Clean cold water can be used for a 1-3-fold pre-dilution when drip or spray distribution is preferred. Confirm the practical dilution procedure on site.
    Q: What is the recommended dosage? A: A general reference range is approximately 50-300 ppm. The optimum dose must be established using the actual foaming water and operating conditions.
    Q: Can it be used in biological wastewater treatment? A: The product is described for municipal biological treatment systems and as not affecting activated-sludge bacterial reproduction under intended use. A controlled site trial and routine biological monitoring are still recommended.
    Q: How should it be stored? A: Keep the sealed drums at normal temperature, protect them from freezing and use first-in-first-out stock rotation. The stated shelf life is one year.

    Leave Your Message